|
|

Closing Machines
See also
|
Tie-Matic
The Tie-Matic twist tie machine is available in three models:
Standard: 8 mm. Wide Jaw: 16 mm. Universal: 22 mm.
The above measures in mm are the maximum diameter of the tying capacity of each model.
Dimension: 570 (L) x 240 (W) x 280 (H) mm.
Weight: 8 kg.
The Tie-Matic machine is closing bags or bundling products. Up to 30 units per minute. This means about 10 times faster than manual closing.
Tie-Matic is working with Plast-Ties ribbon which is a plast ribbon reinforced with one or two wires. |
-small.jpg)
-small.jpg)
|
-smal.jpg)
-smal.jpg)
|
|
Tie-Matic with Ink Jet Printer
The Ink Jet Printer can be supplied as an accessory. It is printing direct on the Plast-Ties ribbon. Date, company name, product name etc., if desired.
The ribbon is of PE plastic on one side and paper for print on the other side.
Printing head and ink refill are combined in an Ink Cartridge, available in black, red, blue, green. |
-sma.jpg)
-sma.jpg)
|
-sma.jpg)
-sma.jpg)
|
|
Tie-Matic with Magicoder Printer
The Magicoder Printer can be supplied as an accessory. Is printing date, company name, product name, etc. on the Plast-Ties ribbon.
The ribbon is of PE plastic on one side and paper for print on the other side.
Print pads available in red, blue and black.
Print types available in sets of both alpha-numeric characters and numeric only. |
-sma.jpg)
-sma.jpg)
|
-sma.jpg)
-sma.jpg)
|
|
Genpack Twister 10
The semi-automatic Genpack Twister 10 is closing bags or bundling products.
Tying capacity: 10 mm (max. diameter).
Dimension, machine: 520 (L) x 280 (H) x 180 (W) mm. Weight, machine: 6 kg.
The machine is working with Plast-Ties ribbons, reinforced with one or two wires.
The Genpack Twister 10 is also very suitable for non-metallic twist tie ribbons (Polycore). |
-smal.jpg)
-small.jpg)
|
-smal.jpg)
-smal.jpg)
|
|
Genpack Twister 40
Is closing bags or bundling products. Up to 30 units per minute. 10 times faster than manual closing.
The Genpack Twister 40 is fully pneumatic. This provides a strong and stable closing.
The machine is available in a horizontal (standard) and a vertical version.
Tying capacity: 40 mm (max. diameter).
Dimension, machine: 720 (L) x 320 (W) x 240 (H) mm. Weight, machine: 30 kg. Material: Stainless steel. |
-smal.jpg)
-smal.jpg)
|
-smal.jpg)
-smal.jpg)
|
|
G-Code Taper
The G-Code Taper with tape and paper makes a quick and customer-friendly closing and date marking in one procedure of plastic bags.
The paper has been attached for date marking / coding. The closure is at the same time acting as a sealing.
Tying capacity: 6.5 mm (max. diameter).
Dimension, machine: 320 (L) x 110 (W) x 220 (H) mm. Weight, machine: 3.5 kg.
Tape roll: 9 mm x 66 mm. Colours: Red, blue, yellow, green, white.
Paper roll: 9 mm x 45 m. Colour: White. |
-small.jpg)
-small.jpg)
|
-small.jpg)
-small.jpg)
|
|
Innosealer
Small and low-priced tape closing machine with tape and paper for closing of plastic bags in one procedure.
The machine takes up very little space, and can be placed everywhere.
The paper has been attached in such a way that the closure is easy to open and re-close.
Dimension, machine: 248(L) x 68(W) x 132(H) mm. Weight, machine: 630 g.
Tape roll: 12 mm wide, 65 m long. Colour: Neutral.
Paper roll: 12 mm wide, 20 m long. Standard colour: White with smileys. |
-smal.jpg)
-smal.jpg)
|
-smal.jpg)
-smal.jpg)
|
See also

|
|